Overview
This document covers the upgrade to the FIO Protocol release of Fio 3.5 (core) and Fio.Contracts 2.9.
Guidance
For this release, the BPs will execute the MSIGs in 3 parts, as noted by in the section headings: Batch #1, Batch #2, and Batch #3.
Batch #2 msigs can only be created after Batch #1 msigs are executed since they need the fio.perms account to exist in order to set the privilege and RAM limits.
FIPS & Rollout Guides
https://github.com/fioprotocol/fips
FIP-36 Deployment and rollout guide : Fio (Core) Update (account public key)
FIP-37 Deployment and rollout guide : Fio Contracts Update (pub key limit)
FIP-38 Deployment and rollout guide : Fio/Fio Contracts Update (new chain account, fee)
FIP-39 Deployment and rollout guide : Fio Contracts Update (encryption pub key)
[FIP-40] Deployment and rollout guide : Fio/Fio Contracts (private domain address reg)
[FIP-42] Deployment and rollout guide : Fio/Fio Contracts Update (single trx handle and domain registration)
[FIP-43] Deployment and rollout guide : Fio Update (get_fee update)
[FIP-46] Deployment and rollout guide : Fio Update (table lookup performance update)
[FIP-47] Deployment and rollout guide : Fio Contracts Update (use regproducer to update info)
Add new actions (Batch #1)
./clio -u http://localhost:8889 push action eosio addaction '{"action":"newfioacc","contract":"eosio","actor":"eosio"}' --permission eosio
./clio -u http://localhost:8889 push action eosio addaction '{"action":"regdomadd","contract":"fio.address","actor":"eosio"}' --permission eosio
./clio -u http://localhost:8889 push action eosio addaction '{"action":"updcryptkey","contract":"fio.address","actor":"eosio"}' --permission eosio
./clio -u http://localhost:8889 push action eosio addaction '{"action":"addperm","contract":"fio.perms","actor":"eosio"}' --permission eosio
./clio -u http://localhost:8889 push action eosio addaction '{"action":"remperm","contract":"fio.perms","actor":"eosio"}' --permission eosio
./clio -u http://localhost:8889 push action eosio addaction '{"action":"clearperm","contract":"fio.perms","actor":"eosio"}' --permission eosio
Validation (Postman): Verify new actions exist
Create new fees (Batch #1)
./clio -u http://localhost:8889 push action -f fio.fee createfee '{"end_point":"new_fio_chain_account","type":"0","suf_amount":"2000000000"}' --permission fio.fee@active
./clio -u http://localhost:8889 push action -f fio.fee createfee '{"end_point":"update_encrypt_key","type":"1","suf_amount":"40000000000"}' --permission fio.fee@active
./clio -u http://localhost:8889 push action -f fio.fee createfee '{"end_point":"add_fio_permission","type":"0","suf_amount":"3000000000"}' --permission fio.fee@active
./clio -u http://localhost:8889 push action -f fio.fee createfee '{"end_point":"remove_fio_permission","type":"0","suf_amount":"1000000000"}' --permission fio.fee@active
./clio -u http://localhost:8889 push action -f fio.fee createfee '{"end_point":"register_fio_domain_address","type":"0","suf_amount":"1183130919351"}' --permission fio.fee@active
Validation:
Postman
https://fiotestnet.greymass.com/v1/chain/get_fee, {“end_point”:”new_fio_chain_account”}
https://fiotestnet.greymass.com/v1/chain/get_fee, {“end_point”:”update_encrypt_key”}
BlockPane Dev Tools
Point to TestNet and set contract=fio.fee and table=fio.fee
Create account and set permissions (Batch #1)
(This must be done before Batch #2 msigs are created)
First, create a file called “payload.json” with the following permissions:
{
"creator": "eosio",
"name": "fio.perms",
"owner": {
"threshold": 1,
"keys": [],
"accounts": [{
"permission": {"actor": "eosio", "permission": "active"},
"weight": 1
}],
"waits": []
},
"active": {
"threshold": 1,
"keys": [],
"accounts": [{
"permission": {"actor": "eosio", "permission": "active"},
"weight": 1
},
{
"permission": {"actor": "fio.perms", "permission": "eosio.code"},
"weight": 1
}],
"waits": []
}
}
Next create a new account with those permissions.
./clio -u http://localhost:8889 push action -j -s -d eosio newaccount payload.json -p eosio@active
Validation:
View account Insert Account Creation mSig here and compare to FIO System account (specifically permissions)
System account may be retrieved via Postman at https://fiotestnet.greymass.com/v1/chain/get_account
Create account to be privileged and set RAM limits. (Batch #2)
Set the account to be privileged.
./clio -u http://localhost:8889 push action eosio setpriv '["fio.perms",1]' -p eosio@active
Validation:
Postman
https://fiotestnet.greymass.com/v1/chain/get_account
account = fio.perms
Expected Result: "privileged": true
Remove RAM limits on the new account, this may be called by eosio, and fio.system only!
./clio -u http://localhost:8889 push action eosio setnolimits '{"account":"fio.perms"}' --permission eosio@active
Validation:
Postman
https://fiotestnet.greymass.com/v1/chain/get_account
account = fio.perms
Expected Result: "ram_quota": -1
Deploy EOSIO system contract (Batch #3)
./clio -u http://localhost:8889 set contract -j eosio /opt/FIO/bin/Contracts/last/fio.system fio.system.wasm fio.system.abi -p eosio@active
Deploy any new system contracts and set each contract on the new account (Batch #3)
./clio -u http://localhost:8889 set contract -j fio.perms /opt/FIO/bin/Contracts/last/fio.perms -p fio.perms@active
Validation: See Validation Notes above for contract validation
Set all other contracts (Batch #3)
./clio -u http://localhost:8889 set contract -j eosio.msig /opt/FIO/bin/Contracts/last/eosio.msig eosio.msig.wasm eosio.msig.abi -p eosio.msig@active
./clio -u http://localhost:8889 set contract -j fio.address /opt/FIO/bin/Contracts/last/fio.address fio.address.wasm fio.address.abi -p fio.address@active
./clio -u http://localhost:8889 set contract -j fio.escrow /opt/FIO/bin/Contracts/last/fio.escrow fio.escrow.wasm fio.escrow.abi -p fio.escrow@active
./clio -u http://localhost:8889 set contract -j fio.oracle /opt/FIO/bin/Contracts/last/fio.oracle fio.oracle.wasm fio.oracle.abi -p fio.oracle@active
./clio -u http://localhost:8889 set contract -j fio.reqobt /opt/FIO/bin/Contracts/last/fio.request.obt fio.request.obt.wasm fio.request.obt.abi -p fio.reqobt@active
./clio -u http://localhost:8889 set contract -j fio.staking /opt/FIO/bin/Contracts/last/fio.staking fio.staking.wasm fio.staking.abi -p fio.staking@active
./clio -u http://localhost:8889 set contract -j fio.token /opt/FIO/bin/Contracts/last/fio.token fio.token.wasm fio.token.abi -p fio.token@active
./clio -u http://localhost:8889 set contract -j fio.tpid /opt/FIO/bin/Contracts/last/fio.tpid fio.tpid.wasm fio.tpid.abi -p fio.tpid@active
./clio -u http://localhost:8889 set contract -j fio.treasury /opt/FIO/bin/Contracts/last/fio.treasury fio.treasury.wasm fio.treasury.abi -p fio.treasury@active
Validation: See Validation Notes above for contract validation
Initialize the Marketplace Account (must be done after escrow contract is set)
This initializes the marketplace TESTNET admin account. Thomas will need to create a Mainnet account as well.
TESTNET: ./clio.sh push action fio.escrow setmrkplcfg '{"actor":"p325sqluvj4u", "listing_fee": "5000000000", "commission_fee": 3, "max_fee": "1000000000", "e_break": 0}' -p eosio@active
MAINNET: ./clio.sh push action fio.escrow setmrkplcfg '{"actor":"q3k31xlj413z", "listing_fee": "5000000000", "commission_fee": 3, "max_fee": "1000000000", "e_break": 0}' -p eosio@active
Validation: check fio.escrow mrkplconfigs table to confirm account was added
Testnet example: https://fio-test.bloks.io/msig/bsbdk2lectan/setmrkplcfg
TODO: Remove once script is finalized.
Examples
Fee: Testnet example: https://fio-test.bloks.io/msig/gws1hlwlqhq1/fiocreatefee
New Account: Testnet example: https://fio-test.bloks.io/msig/bsbdk2lectan/crtfioescrow2
Privileges: Testnet example: https://fio-test.bloks.io/msig/un3emex141fp/setpriv.a
Contract Update: Testnet example: https://fio-test.bloks.io/msig/bsbdk2lectan/updfiosys
Set contract on Account: Testnet example: https://fio-test.bloks.io/msig/bsbdk2lectan/crtfioesc
Marketplace Account: Testnet example: https://fio-test.bloks.io/msig/bsbdk2lectan/setmrkplcfg
Items of Interest:
TestNet mSig Proposals:
Capture from Telegram TestNet channel
Execution Notes:
BP may execute msig via links above
Validation Notes:
For addaction and createfee actions, view transaction (after execution)
View transaction details, click ‘Block Number’, then confirm that next block is produced by clicking ‘Next’
For contract deployment (set contract) validation, run fio.devtools “Contract Hashes” query to confirm ABI and contract hashes match.
Use Aloha EOS TestNet Producer Reliability Tracker to verify that no blocks are missed. Note, missed rounds will result in a post to the Telegram TestNet channel.
Use FioWatch tool to check transaction
Add Comment